Merge commit '1a3a83f33224876bfe5e8131542a8e124f4bc89b' as 'Sources/mbedTLS'

2026-04-24 00:00:05 +08:00 · 2020-02-24 14:36:19 +03:00
parent 9b6210faab 1a3a83f332
commit c274ea6ecc
928 changed files with 198245 additions and 0 deletions
@@ -0,0 +1,82 @@
+# mbed TLS Selftest Example
+
+This application runs the various selftest functions of individual mbed TLS components. It serves as a basic sanity check to verify operation of mbed TLS on your platform. In the future, a wider portion of the mbed TLS test suite will become part of this example application.
+
+## Pre-requisites
+
+To build and run this example you must have:
+
+* A computer with the following software installed:
+  * [CMake](http://www.cmake.org/download/).
+  * [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows).
+  * [Python](https://www.python.org/downloads/).
+  * [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded).
+  * A serial terminal emulator (Like screen, pySerial and cu).
+* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
+* A micro-USB cable.
+* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration).
+
+## Getting started
+
+1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board.
+
+2. Navigate to the mbedtls directory supplied with your release and open a terminal.
+
+3. Set the yotta target:
+
+    ```
+    yotta target frdm-k64f-gcc
+    ```
+
+4. Build mbedtls and the examples. This may take a long time if this is your first compilation:
+
+    ```
+    $ yotta build
+    ```
+
+5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-selftest.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
+
+6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.
+
+    Use the following settings:
+
+    * 115200 baud (not 9600).
+    * 8N1.
+    * No flow control.
+
+7. Press the Reset button on the board.
+
+8. The output in the terminal window should look like:
+
+    ```
+    {{timeout;40}}
+    {{host_test_name;default}}
+    {{description;mbed TLS selftest program}}
+    {{test_id;MBEDTLS_SELFTEST}}
+    {{start}}
+
+      SHA-224 test #1: passed
+      SHA-224 test #2: passed
+      SHA-224 test #3: passed
+      SHA-256 test #1: passed
+      SHA-256 test #2: passed
+      SHA-256 test #3: passed
+
+        [ ... several lines omitted ... ]
+
+      CTR_DRBG (PR = TRUE) : passed
+      CTR_DRBG (PR = FALSE): passed
+
+      HMAC_DRBG (PR = True) : passed
+      HMAC_DRBG (PR = False) : passed
+
+      ECP test #1 (constant op_count, base point G): passed
+      ECP test #2 (constant op_count, other point): passed
+
+      ENTROPY test: passed
+
+      [ All tests passed ]
+
+    {{success}}
+    {{end}}
+    ```